AMERICAN NATIONAL STANDARD FOR LOW ENERGY POWER OPERATED SLIDING AND FOLDING DOORS
- GENERAL
1.1 Requirements in this Standard apply to low energy power operated sliding and folding door systems for pedestrian use, and some small vehicular use. The activation of all doors described in this standard requires a knowing act. Included are provisions intended to reduce the chance of user injury or entrapment.
1.2 Doors that require higher speeds, forces, shorter time delays, and activating sensing devices shall comply with ANSI/BHMA A156.10 for Power Operated Pedestrian Doors and are not covered in A156.38.
1.3 This Standard does not attempt to assess any factors that exist with respect to custom design installations which are not required to meet the requirements of this Standard.
1.4 Unless otherwise specified, all references to time delay, opening speed and forces in this standard, refer to the operator in the power mode as opposed to the manual mode.
1.5 Required dimensions are expressed in US units first and the SI (metric) equivalents given in parentheses are approximate. All values which do not carry specific tolerances or are not marked maximum or minimum shall have the following tolerances: Linear dimensions shall be ± 1/16 in (1.6 mm). Pounds or pound force shall be ± 5%. Angular measurements shall be ± 4 degrees. Voltage measurements shall be 5 percent. Temperature measurements shall be 4 degrees F ( 2 degrees C).
1.6 Compliance with the requirements of this standard shall be accomplished through factory settings or field adjustments as necessary.
1.7 Operators used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory, and be subject to a periodic in-plant follow-up service. Consult the authority having jurisdiction for the appropriate fire test requirements.
1.8 Refer to applicable building codes for means of egress clear width requirements, and knowing act device locations.
We have American Association of Automatic Door Manufactures (AAADM) certified inspectors on staff at Oregon Door Consultants to help you navigate all your Low Energy Power Operated Sliding and Folding Door requirements. Have a question for us? Contact us Here!
